Connect and secure your LED strip lights with ease. This kit includes 2-pin L-shaped corner connectors and fixing clips designed for 8mm or 10mm wide COB and SMD LED strips. It is a simple, solder-free solution for creating clean corners and mounting strips on surfaces.

Installing LED strip lighting around corners can be tricky without the right connectors. These L-shaped connectors let you make a 90-degree turn in your tape light run without cutting or soldering. The set also includes fixing clips to hold your LED strip securely in place on wood, walls, or other surfaces.

Each connector features a snap-on design that grips the end of your LED strip for a reliable electrical connection. The fixing clips act as clamps to keep the strip flat and aligned. This kit is compatible with low-voltage (5-36V) single-color LED strips, including both COB and SMD types like 2835 and 5050.

Before you start, check that your LED strip width matches the connector size. Use an 8mm connector for an 8mm strip and a 10mm connector for a 10mm strip. Make sure the positive and negative poles are aligned correctly on both sides of the connector. This kit works with non-waterproof and certain waterproof LED strips, but the fixing clips are only for non-waterproof strips.

Key Features and Benefits

- L-shaped 2-pin connectors that let you create clean 90-degree corners in your LED strip layout without soldering.

• Snap-on connection that secures the strip in place for a stable electrical link.

• Fixing clips that hold the LED strip flat against wood or other surfaces to prevent peeling or sagging.

• Compatible with 8mm or 10mm wide COB and SMD LED strips, including 2835 and 5050 types.

• Works with low-voltage strips from 5V to 36V for safe and reliable use in indoor setups.

Who Is This For

- DIY enthusiasts setting up under-cabinet or cove lighting who need to turn corners.

• Anyone installing LED strip lights on wooden shelves or furniture who wants a secure mount.

• Users looking for a quick, solder-free way to connect LED strip segments at an angle.

• Homeowners adding accent lighting to corners or edges where the strip must change direction.

Usage Scenario

Mark was installing LED strip lights under his kitchen cabinets. When he reached the corner of the cabinet, he needed to turn the strip 90 degrees. Instead of cutting and soldering, he used the L-shaped connector from this kit. He snapped the connector onto the end of the strip, aligned the poles, and pressed it into place. Then he used the fixing clips along the run to keep the strip flat against the wood. The whole corner connection took less than a minute and worked perfectly.

Micro Comparison

Many LED strip connectors require soldering or crimping to make a corner turn. This kit uses a simple snap-on design that holds the strip securely without tools or heat. The included fixing clips also add value by helping you mount the strip neatly, which is not always included with other connector packs. If you want a fast, clean installation for your low-voltage LED strips, this kit offers a complete solution.

Specifications

- Type: 2-pin L-shaped corner connector and fixing clips

• Compatible Strip Width: 8mm or 10mm (choose the correct size)

• Compatible Strip Types: COB and SMD LED strips (2835, 5050)

• Voltage Range: 5V to 36V low-voltage DC

• Certification: CE, RoHS

• Model Number: MB2P-8 (for 8mm) and MB2P-10 (for 10mm)

• Connector Works With: IP20/30 non-waterproof strips, IP54/65 waterproof strips (one side glue coating)

• Fixing Clips Work With: IP20/30 non-waterproof strips only

Package Includes

- 5 x 2-pin L-shaped LED strip connectors

• Fixing clips (quantity depends on option selected)

Why You Will Love It

You will love how easy it is to turn corners with your LED strip lights. No soldering, no extra wires, just snap and go. The fixing clips also give you a clean, professional-looking installation that stays put over time.

Questions and Answers

Question: Will these connectors work with a 12V LED strip?

Answer: Yes, they work with any low-voltage LED strip between 5V and 36V, including 12V strips.

Question: Can I use the 8mm connector on a 10mm LED strip?

Answer: No, you must match the connector width to your strip width. An 8mm connector will not fit a 10mm strip.

Question: Do I need any tools to install these connectors?

Answer: No tools are needed. The connectors snap onto the end of the LED strip by hand.

Question: Are these connectors reusable if I need to change my setup?

Answer: They are designed for a secure fit and may be difficult to remove without damage. It is best to plan your layout before installing.

Question: Will the fixing clips damage my LED strip?

Answer: No, the clips are designed to hold the strip gently without cutting or damaging the surface.